Power of pressure washer to washing courts and walkways can make weathered block and pavement areas seem brand new look. With the help of proper maintenance, sidewalks and driveways can last a long time. However, inappropriate or disruptive washing can damage concrete granules and reduce their lifespan. With some simple steps on how to clean your concrete and paved areas, you can keep your outside areas clean and make available for the new events. In this blog, we will talk about the cleaning tips of concreate areas with the help of pressure washer. Also, I am including the types of material using, pressure tips and techniques that have been recommended by a local driveway cleaning Sydney company.
What is a Pressure Washer?
A pressure washer, also called a power washer, is an electric appliance that is powered by a motor. It is a device that runs water at a high pressure to remove dust, dirt stains from outdoor areas such as house windows, vehicles, decks, and other areas as well as to remove mud. A typical garden pipeline delivers approximately 40 PSI. But a distinct pressure washer intended for a homeowner can generate anywhere from 1,500 to 4,000+ PSI.
Why do you want a pressure washer for your Driveway area?
If you wanted to increase your home’s curb attraction without spending more money, then you can go with the pressure washer. It helps to remove the decay, soil, grime, and you should understand there is a proper way to pressure wash your concrete or brick driveway.
Some Tips and Steps to Clean a Concrete Driveway by the Pressure Washer
By choosing the pressure washer for cleaning the concrete or brick driveways is the best way to clean your paved areas. Start by selecting the proper air pressure nozzle tip on the washer. We can fix the pressure washer with about three GPM and 3000 PSI (Ideal pressure for concrete and brickworks). If you can choose the tip with the widest angle, it will complete the job without any damage or degrading of the surface of the driveway. Below are some tips and steps on how to clean the concrete areas with the help of pressure washers.
Does material matter?
A pressure washer works better if we talk about which material is made of the driveway. However, driveways made of brick and concrete often acquire mold or algae through the fall and winter seasons. The surface of blocks and cement becomes more porous as it gets older, due to which the acquisition of mold or algae begins to occur. So, the material doesn’t matter cleaning the driveways rather it’s impartially fast with just water by the correct technique.
What Best Technique You Can Apply
First question in your mind what are the best techniques should I use for pressure washer. I would like to help on this, by suggesting proper procedures that you can use to wash the various brick and concrete surfaces reasonably and quickly. You can start by applying hardscape at one end. Hold the tip approximately 10-12 ” from the spot and use a uniform and consistent sweeping motion utilizing a pressure washer.
FewImportant Things That Should be Considered While Using the Pressure Washer
- Environmental Pollution: If you are an environmental lover, then I am writing this for you. You have to take special care of where the water used by you is going while washing the driveway. If you are removing chemicals and oil from your driveway, it can pollute the area around you; there is a high probability that you do not live in a muddy sewer area. But it is more important to think that the water entering your storm drain is not going into your local stream.You should close the storm drain when you are clearing the driveway, then let the water evaporate, doing so will not pollute your environment.
- Storing: As you all know, you can buy an inexpensive pressure washer – or even rent it at a home improvement shop locally. If you keep the pressure washer in your home backyard, you should plan steel buildings for extra storage space. These types of steel carports, steel garages keep your belongings safe and also protect them from burglaries.
- Take Guide from The User Manual: If you are a beginner or using a pressure washer for the first time, then the user manual is essential for you; however, you should always use the user manual as you can know how to use the pressure washer correctly. You can also know from its help, which chemicals in the detergent tank will not be harmful to the environment.
- Safety is The Best Policy: It is sometimes risky to use a pressure washer when we do not use it with complete safety. As always, high-pressure water can be dangerous and unsafe for you. The use of a surface cleaner reduces the risk because it has a pressure controller inside the device unit that we call jet flow. Make the people around you aware that do not hit its pressure directly on the eyes; it can cause eye injury. It is imperative to take care of some such safety parameters.
Conclusion: The use of a pressure washer is undoubtedly very effective in cleaning your paved areas. Hence, go through the valuable tips mentioned above and make your cleaning task easy and convenient.