When erecting piping for new construction, you need to worry about more than just the layout of the home. You need to keep in mind that worrying about the layout of your home isn’t necessarily your only concern. In order to make the home livable, you also need to ensure that it has the necessary infrastructure in the form of the electrical grid and pipeline layout. Still, this takes some careful planning on your part and a bit more knowledge on the subject matter.
With that in mind and without further ado, here’s an ultimate guide on piping for new construction that you need to be aware of.
1.The kitchen and bathroom should share a wet wall.
A wet wall is a wall that is made to be particularly water-resistant. This is usually due to the fact that it conducts a pipe that brings water to the kitchen sink or the bathroom shower. The thing is that this wall needs to be built in a specific manner so that it is water-resistant. So, why not make things logistically simpler by sharing a wall between a kitchen and a bathroom. This would significantly cut your expenses and handle a large portion of your piping work with one go.
2.Shut-off valves are the key.
Knowing the position of your shut-off valves is incredibly important, but when planning this from scratch, you can make a choice where you want these valves to be. Ideally, you want to have at least several valves in the strategic locations across your household. This way, if there’s a burst pipe, you can just shut it off but still have the water running in your kitchen. While this is not something that a lot of people would pay attention to, the truth is that it’s a massive quality of life improvement.
3.Consult your plumbers.
Local sewage system and water supply, as well as local terrain, may require you to adopt a completely different strategy to that which you have intended. This is why consulting someone with experience in dealing with these pipes might be your best course of action. For instance, when planning on laying a pipeline for your Newcastle property, it only fits that you would look for assistance from Newcastle plumbers. This way, you will have a unique insight from someone with years of experience in laying, fixing, and replacing these pipes. This might save you a fortune on maintenance.
4.The materials make a difference.
Another thing worth considering is the material of the piping used. Choosing plumbing pipes is something that you have the privilege of doing right away. If you postpone this obligation, replacing them all on a later date will be incredibly expensive. Every material type has its own set of advantages and disadvantages. For instance, PVC is ideal for cold and hot, portable water, stainless steel is best used in areas that are subject to corrosion, and cans iron is a preferred choice for water distribution systems.
5.Consider wastewater diversion.
Finally, if you’re particularly eco-friendly, you might want to consider reusing your laundry water and your bath water for the irrigation of your law. While this water may no longer be suitable enough for the hygiene and the consumption, it’s more than valid for watering your lawn. Also, keep in mind that the wastewater diversion tends to save you quite a bit of money on a yearly basis. On top of it all, you get to save a small fortune on your utility bill. Later on, if you invest in a rainwater harvesting system or go smart and install a Wi-Fi-controlled sprinkler, you’ll have a much easier job of saving money.
At the end of the day, you need to keep in mind that this is something that you’ll do while constructing your home and then (ideally) not worry about it for years and decades. Keep in mind that working on piping for new construction is a one-time project. The more you try to skimp on this, the more you’ll end up paying in total maintenance costs. Not to mention frequent malfunctions and problems that you’ll encounter on a later date. All in all, it’s definitely worth doing your research and picking the most suitable long-term solutions for your new construction.